E3D Nozzle 0,15 mm

The new internal geometry of v6 Nozzles is optimised to reduce back-pressure, this ensures smooth,easy flow of filament whilst improving the effectiveness of retractions. The bottom flat surface of the nozzle which flattens down the layer is custom to each nozzle size, for small nozzles a small nozzle tip gives you high precision. On the larger nozzles, a nozzle tip assists in the smooth printing of larger layers.

Material: brass

Nozzle size: 0,15 mm

The nozzle can be used in hotendech from E3D - v4, v5, v6, lite6 and Kraken.

Slicer settings

Extruder

• Nozzle Diameter: 0.15mm
• Extrusion Multiplier: 1.00
• Extrusion Width: 0.18mm
• Layer Height: 0.0800mm
• Retraction Distance: 1.00mm
• Extra Retraction Distance: 0.00mm
• Retraction Vertical Lift: 0.00mm (important to reduce vibration and vertical stringing)
• Retraction Speed: 30.0mm.s-1
• No Coasting
• No Wiping

Layers

• 3 layers top, bottom and sides printed inside out
• First Layer Height: 160%
• First Layer Width: 120%
• First Layer Speed: 50%

Infill

• Triangular Infill (0, 60, -60)
• Interior Fill Percentage: 25%
• Outline Overlap: 15%
• Infill Extrusion Width: 100%
• Minimum Infill Length: 5.00mm (can be less due to the good bridging capabilities)
• Print sparse infill every layer

Support (if required)

• Support Infill Percentage: 30%
• No extra inflation distance
• No dense support layers
• Support every layer
• Horizontal Offset From Part: 0.30mm
• Upper Vertical Separation: 1 layer
• Lower Vertical Separation: 1 layer
• Max Overhang: 45 deg

Speeds

• Default Printing Speed: 30.0mm.s-1
• Outline Underspeed: 75%
• Solid Infill Underspeed: 80%
• Support Structure Underspeed: 80%
• X/Y Axis Speed: 80mm.s-1
• Z Axis Speed: 16.7mm.s-1